Need help?Do you have a question about the Parweld XTM-WF100 and is the answer not in the manual?
Details hazards of touching live electrical parts and necessary precautions.
Discusses flammables, sparks, hot work pieces, and closed containers.
Details hazards of pressurized gas cylinders and their handling.
Details connecting the input plug and ensuring proper grounding.
Step-by-step process for loading wire, adjusting tension, and feeding it through the torch.
How to switch on, set voltage, feed wire, and initiate/terminate the weld.
Guidelines for selecting material thickness, wire size, and feed speed for optimal welds.
Explains voltage, wire speed, and their impact on weld bead characteristics.
Addresses porosity caused by shielding gas, drafts, and dirty surfaces.
Discusses issues like incomplete fusion and excessive penetration.
Covers how to avoid and correct burn-through during welding.
Troubleshoots excessive spatter and problems with wire feeding.
General| Input Voltage | 230V |
|---|---|
| Duty Cycle | 60% @ 100A |
| Wire Size | 0.6-0.8mm |
| Wire Spool Size | 5kg |
| Input Frequency | 50/60Hz |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Insulation Class | H |
| Protection Class | IP21S |
| Welding Process | MIG |
To Next Page
