Need help?Do you have a question about the Parweld XTM 201Di and is the answer not in the manual?
General| Type | Inverter |
|---|---|
| Input Voltage | 230V |
| Max Output Current | 200A |
| Output Current Range (MMA) | 20-200A |
| Output Current Range (TIG) | 10-200A |
| Weight | 7.5kg |
| Protection Class | IP21S |
| No Load Voltage | 65V |
| Insulation Class | H |
| Duty Cycle (MMA) | 60% @ 200A |
| Duty Cycle (TIG) | 60% @ 200A |
| Process Types | MMA, TIG |
Check power supply adequacy and connect input plug according to safety standards.
Detailed steps for preparing the machine for MIG welding, including wire drive and torch installation.
Guide for setting up synergic MIG welding with screen prompts for process, gas, material, and thickness.
Steps for setting up manual MIG welding, including adjusting wire speed, voltage, and inductance.
Guide for setting up MMA welding, including process selection and parameter adjustments.
To Next Page