11
Adjust by Pressing Torch Buttons on the Handle.
7.3 Remote Control MIG Torch
Allows remote adjustment of the Voltage and wire speed from the
torch handle when in the welding screen.
MIG SYN MIG MAN
Operating screen (MIG SYN)
Trim Wire Speed Trim Voltage
7.2 MIG MAN Manual MIG welding setup
Follow the screen prompts to complete the machine setup.
Example setting.
In manual mode you can adjust the parameters using the
controls indicated.
7.4 MMA Welding
Follow the screen prompts to complete the machine setup.
Example setting.
Wire Speed Up
Volts Down
Adjust Inductance (short circuit current)
Adjust Inductance (short circuit current)
Adjust Wire Speed Value Adjust Voltage Value
Inductance
Wire Speed Voltage
Volts Up
Wire Speed Down
To Next Page
