Need help?Do you have a question about the Pass X150.5 and is the answer not in the manual?
Details voltage, current, fuse types, and AC line source frequency requirements for the amplifier.
Emphasizes the importance of proper grounding and the specifications for the AC power cord.
Lists detailed technical specifications including gain, frequency response, power output, and dimensions.
Warns against water, improper power sources, and defeating grounding provisions for user safety.
Advises on cord protection, user servicing limitations, and fuse replacement procedures.
General| Number of Channels | 2 |
|---|---|
| Input Impedance | 30 kOhms |
| Weight | 50 lbs |
| Gain | 26 dB |
| Damping Factor | > 100 |
| Signal-to-Noise Ratio | > 100 dB |
| Power Output | 150 Watts into 8 Ohms, 300 Watts into 4 Ohms |
| Frequency Response | 100 kHz |
| Input Sensitivity | 1.5 V |
| Power Consumption | 600 W |
To Next Page
