Need help?Do you have a question about the Pass INT-60 and is the answer not in the manual?
Device should not be used near water. Avoid spills and ensure openings are protected.
Connect to specified mains voltage, use grounded outlets, and route cords safely to prevent damage.
Ensure free air circulation around the product with a minimum of 6" space.
Avoid naked flames, suitable for specific climates, and do not attempt unauthorized servicing.
Specific voltage, grounding, and altitude requirements for different countries are listed.
Lists registered trademarks of Pass Laboratories, Inc.
Instructions for removing the INT-60 from packaging and placing it.
Details on connecting sources via XLR and RCA inputs to the amplifier.
How to connect loudspeakers to the amplifier's output terminals.
Explanation of the power, mute, input selection, and volume controls on the front panel.
Guidance on cleaning the amplifier's finish and acrylic window.
Instructions for replacing the AAA batteries in the remote control.
Instructions for safely replacing the fuse with the correct type and rating.
To Next Page
General
