Need help?Do you have a question about the Pass INT-25 and is the answer not in the manual?
Avoid using the device near water or where liquid can spill into it.
Connect to a mains power source matching product specifications and with protective earthing.
Use provided or safety-rated cords, route carefully, never use damaged cords.
Ensure 6" of free air circulation around the amplifier to manage heat.
Keep away from naked flames; suitable for tropical climates up to 2000m and 40°C.
User servicing limits, fuse replacement steps, and referring complex tasks to qualified personnel.
Specific warnings for China, Norway, Sweden, Finland, and Denmark regarding voltage and grounding.
Handle the heavy INT-25 amplifier carefully, keep packaging, and place for cable access.
Connect sources to inputs and speakers to binding posts, ensuring good connections.
Identifies front panel controls: power, display, inputs, mute, IR window, and volume control.
Details rear panel connections: AC power switch, fuse, mains inlet, speaker terminals, and audio inputs.
Explains remote button functions for power, mute, input selection, and volume adjustments.
Covers power on/off, front display volume, input selection, and mute operation.
Outlines warranty terms, customer responsibilities, and return procedures for different regions.
Details impact of modifications, serial number tampering, and counterfeit products on warranty.
General| Gain | 26 dB |
|---|---|
| Input Impedance | 50k ohms |
| Bias | Class A |
| Power Output | 25W per channel into 8 ohms |
| Total Harmonic Distortion | 0.1% |
To Next Page
