~~ _."~"" -~--
;. fj;
SERVICE elect ra 3000 A
ANLEITUNG INSTRUCTION INSTRUCTION INSTRUCCION
0
3. Unscrew the support for mast (1) if there
is one fitted.
-Should there already be a COLOR twin
support, there is no need to unscrew it.
-1
( 4. For electra 3000A with DUOMATIC 80, DUOMATIC-S and TRICOMAT-32:
-If there is no COLOR 80 ££ SPECIAL two-colour changer fitted, ,
this must now be done.
-Assembly COLOR 80, following the instructions 33.269.83
-Assembly. SPECIAL two-colour changer, following the instructions 33.610.83
0
IMPORTANT:
,
.£
The fitting must be done by properly trained staff of the agency.
s.fa) If you intend to fit the electra 3000A to the Stand-63 (RT-63) ,
continue fitting at point 6.
i b) If you intend to fit the electra 3000A to the Stand-80 (RT-80) ,
\
continue fitting at point 9.
C\
!
To Next Page
Loading...