Passtech PT200 - ANNEX a Beep & LED Table

Version 1.0 - 15 -
ANNEX A Beep & LED Table
Beep LED Description
1 x short beep 1 x Green(2sec) OK
2 x short beep 1 x Red(2sec) Operation Error
3 x short beep 1 x Red & Green in
turn(2sec)
Time over
Do-Re-Mi Melody 1 x Red & Green in
turn(2sec)
Successful Set up / mode
change / Time setting
5 x short beep 5 x Red & Green Low battery
Do-Re-Mi Melody 2 x Red & Green Successful connection
between front and back
bodies.
1 x short beep 1 x Green Off the Alarm by Control
card
Melody 1 x Green Successful registration of
Owner Card/ Master Card
Melody 1xGreen Read Clear Card and delete
the information of M/U in
the memory of the lock.
No Beep Both Green and Red LED
blinks
1) Owner Card is not
registered.
2) In case of Shift or Week-
day operation mode,
Alarm for shift or Time
due.
No Beep Red on/off Owner card is registered,
but Master card is not
registered.
No Beep Green on/off Owner & Master card are
registered, but User card
is not registered in
Assigned Mode.