1. Understanding PT300 Locker Lock
1.1 What is PT300 Locker Lock?
- PT300 locker lock is operated by either 13,56 MHz RF keys or keypads.
- It is the battery power operating standalone RFID lock.
- It has the wireless online communication feature that provide the central
controlling and remote monitoring ( See Esmart ultra user manual )
1.2 Operation cards
• Security Key value to be loaded to locks at scanning.
• Then, the locks will accept only the RFID cards which have the same
security key value.
• Lock will be programmed with various options at scanning.
• Setup card can be set from Lock Installation Software (LIS).
• All locks will be open at scanning.
• User card registration in the lock will be deleted and the lock will be
ready to accept new user card.
• Locks will be open or close without User card registration deletion.
• Useful when user needs to open lock temporarily.
• Master cards registration to be deleted at scanning this card on locks.
• After Owner card scanning on lock, scan new master cards to register
to the lock.
• Lock to be programmed with various options at scanning as you set.
• Time, Master cards registration, Master code, etc can be updated
without changing lock ID.
• Latest 18 event history to be collected at scanning.
• Card number, event type (open & close), time of event, user name, etc
to be collected.
• Various information of lock can be collected into this card.
• One Lock info card can collect information from up to 100 locks.
• Lock ID, Operation mode, Battery status, software version, time, auto
opening and more to be collected.
To Next Page
Loading...