PATIOJOY GYM06488 - User Manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
3 Pcs Wicker Set
FLOOR AREA
2MX2M
ASSEMBLED BY 2 ADULTS
GYM06488

Summary

Customer Support and Preparation

Contact Information

Contact our friendly customer service department for assistance.

Before You Start Guidelines

Read steps, check parts, ensure spacious area, use handtools.

Chair Component Identification

Chair Parts List

Lists all individual parts for the 3 Pcs Wicker Set with quantities.

Chair Assembly Diagram

Visual guide showing labeled chair parts for assembly.

Chair Hardware Specification

Chair Fasteners and Tools

Details bolts, washers, and allen wrench for chair assembly.

Chair Assembly Steps

Step 1: Attach Bottom Feet

Attach bottom feet to chair arms using bolts and washers, leaving loose.

Step 2: Attach Seat

Connect the seat to the chair arms with bolts and washers.

Step 3: Attach Footrest

Fasten the footrest to the chair arms using specified hardware.

Step 4: Attach Back Panel

Secure the back panel to the chair arms using bolts and washers.

Step 5: Attach Back to Seat

Connect the back support to the seat using bolts and washers.

Step 6: Attach Back to Arms

Fasten the backrest to the chair arms using the provided hardware.

Step 7: Final Tightening and Cushions

Tighten all bolts, add cushions, and prepare the chair for use.

Chair Maximum Load Capacity

Weight Limit and Safety Warning

Specifies the 250 lbs weight limit and warns against overloading.

Table Component Identification

Table Parts List

Lists parts for the side table, including top, legs, and shelf.

Table Assembly Diagram

Visual guide showing labeled table parts for assembly.

Table Hardware Specification

Table Fasteners and Tools

Details bolts, washers, and allen wrench for table assembly.

Table Assembly Steps

Step 1: Attach Table Legs to Top

Connect table legs to the tabletop using bolts and washers, keeping them loose.

Step 2: Attach Legs to Shelf

Secure table legs to the resin shelf using specified bolts and washers.

Step 5: Final Table Assembly

Tighten all bolts and position the table upright for use.

Table Maximum Load Capacity

Table Weight Limit and Safety

Indicates the 25 lbs weight limit for the table and warns about instability.

Care and Maintenance

Cleaning and Furniture Care Advice

Guide on dusting, cleaning, avoiding solvents, and protecting from elements.

Overview

1. Function Description
2. Important Technical Specifications
3. Chairs
4. Table
5. Usage Features
6. Important Safety Warnings
7. Maintenance Features

This document serves as the user's manual for the PATIOJOY 3 Pcs Wicker Set, model GYM06488. It provides detailed instructions for assembly, a list of components, and important safety and maintenance information. The set is designed for outdoor use and includes two chairs and one table.

Function Description:

The PATIOJOY 3 Pcs Wicker Set provides comfortable seating and a convenient surface for outdoor relaxation. The two chairs are designed for individual seating, while the accompanying table offers a place for drinks, books, or other small items. The set is intended for use by adults and is suitable for various outdoor settings such as patios, decks, or gardens. The wicker construction provides a classic aesthetic, while the included cushions enhance comfort.

Important Technical Specifications:

Chairs:

• Maximum Load-Bearing Capacity: 250 lbs per chair.
• Components:
  • Left Arm (x2)
  • Right Arm (x2)
  • Back (x2)
  • Seat (x2)
  • Footrest (x2)
  • Back Panel (x2)
  • Back Cushion (x2)
  • Seat Cushion (x2)
  • Bottom Foot (x8)
• Hardware:
  • M6 x 15mm Bolts (L) (x4)
  • M6 x 30mm Bolts (M) (x32)
  • M6 x 35mm Bolts (N) (x12)
  • M6 Washers (O) (x48)
  • Allen Wrench (P) (x1)
• Floor Area Required for Assembly: 2M x 2M.
• Assembly Requirement: Assembled by 2 adults.

Table:

• Maximum Load-Bearing Capacity: 25 lbs.
• Components:
  • Table Top (x1)
  • Table Leg (x4)
  • Resin Shelf (x1)
• Hardware:
  • M6 x 10mm Bolts (K) (x8)
  • M6 x 15mm Bolts (L) (x4)
  • M6 Washers (O) (x12)
  • Allen Wrench (P) (x1)

Usage Features:

The assembly process is broken down into clear, sequential steps for both the chairs and the table. For the chairs:

1. Step 1: Attach the bottom foot (G) to the bottom of each arm (B) using M6 x 30mm bolts (M) and M6 washers (O). It is crucial not to fully tighten these bolts until assembly is complete. This step is repeated for the other arm (A).
2. Step 2: Attach the seat (D) to the arm (B) using M6 x 35mm bolts (N) and M6 washers (O). The bolts go through pre-drilled holes on the seat into pre-welded nuts on the arm. This step is repeated for the other arm (A).
3. Step 3: Attach the footrest (E) to the arm (A&B) using M6 x 30mm bolts (M) and M6 washers (O).
4. Step 4: Attach the back panel (F) to the arm (A&B) using M6 x 30mm bolts (M) and M6 washers (O).
5. Step 5: Attach the back (C) to the seat (D) using M6 x 35mm bolts (N) and M6 washers (O).
6. Step 6: Attach the back (C) to the arm (A&B) using M6 x 15mm bolts (L) and M6 washers (O).
7. Step 7: Once all components are in place, tighten all bolts using the provided Allen wrench. Turn the chair to an upright position. Finally, place the seat cushions (R) and back cushions (Q) on the chair. The chair is then ready for use.

For the table:

1. Step 1: Attach the legs (I) to the table top (H) by inserting M6 x 10mm bolts (K) with M6 washers (O). Similar to the chairs, do not fully tighten these bolts until assembly is completed.
2. Step 2: Attach the legs (I) to the resin shelf (J) by inserting M6 x 15mm bolts (L) with M6 washers (O).
3. Step 5: (Note: Steps 3 and 4 are not explicitly listed for the table in the provided manual, implying a direct jump to final tightening after the previous steps). Tighten all bolts with the Allen wrench. Turn the table to the upright position. The table is then ready for use.

Important Safety Warnings:

• Load Capacity: Adhere strictly to the specified maximum load-bearing capacities for both the chairs (250 lbs) and the table (25 lbs). Exceeding these limits can cause instability, leading to potential injuries.
• Assembly Order: Follow each assembly step carefully and in the correct order to prevent difficulties and ensure structural integrity.
• Tool Usage: Use only the provided hand tools for assembly. Power tools may scratch or damage the parts.
• Work Area: Assemble the furniture in a spacious area, preferably on a carpet, to protect parts and facilitate movement.

Maintenance Features:

• Cleaning: Use a soft, clean cloth for dusting. Furniture polish is not strictly necessary, but if used, test it in an inconspicuous area first. Avoid using solvents or water to clean the furniture, as these can damage the finish.
• Spills: Liquid spills should be removed immediately by blotting gently with a soft, clean cloth. Avoid rubbing.
• Fastener Checks: Periodically check all bolts and screws and tighten them if necessary to maintain stability and safety.
• Outdoor Protection: Protect outdoor furniture with a cover when not in use. Long-term exposure to sunlight can damage the surface.
• Environmental Factors: Wood and metal frames can suffer damage when exposed to extreme temperatures and humidity. Proper care in these conditions will extend the life of the furniture.
• Longevity: Following these care and cleaning tips will enhance the furniture's lifespan and appearance.

The manual emphasizes contacting customer service for any missing or damaged parts, rather than returning the item, to ensure prompt resolution.

PATIOJOY GYM06488 Specifications

General

Brand	PATIOJOY
Model	GYM06488
Category	Patio Furniture
Language	English