Patiowell T-PS1053S0BNA

Need help?

Do you have a question about the Patiowell T-PS1053S0BNA and is the answer not in the manual?

Summary

Before Starting Assembly

Required Tools

Lists all necessary tools for the assembly process.

Assembly Precautions

Important notes on assembly conditions, safety, and time.

Parts Identification

Roof Parts

Lists all components specifically for the roof section.

Wall Parts

Lists all components specifically for the wall sections.

Door Parts and Screws

Lists components for the door and all required screws.

Assembly Steps

Base Frame Assembly

Steps 1-4: Constructing the bottom frame of the shed.

Wall Panel Installation

Steps 5-20: Attaching and securing all wall panels.

Roof Assembly

Steps 21-26: Mounting and securing the roof structure.

Door Installation

Steps 27-32: Assembling and fitting the shed door.

Final Assembly and Safety

Finishing Touches

Step 33: Final assembly and safety application.

Care and Safety Guidelines

Essential maintenance, safety, and usage recommendations.

This document provides assembly instructions and important information for the Patiowell Metal Garden Shed, SKU: T-PS1053S0BNA.

Function Description:

The Patiowell Metal Garden Shed is designed as an outdoor storage solution for various items, including garden tools, equipment, and other belongings. Its primary function is to provide a secure and weather-resistant space to protect stored items from the elements. The shed is intended for personal use in gardens or yards.

Important Technical Specifications:

SKU: T-PS1053S0BNA
External Dimensions:
- Height: 71.1 inches
- Width: 61 inches
- Depth: 34.3 inches
Materials: The shed is constructed from metal, with some parts having steel edges.
Assembly Time: Approximately 2-3 hours for installation.
Required Personnel for Assembly: Two people are required for assembly.
Fasteners: The assembly uses various screws and gaskets, including:
- F1 (M4*10): 160 pieces
- F2 (M4*10): 8 pieces
- F3 (M5*12): 16 pieces
- F5 (M4*16): 4 pieces
- V1: 80 pieces
- V2: 150 pieces
Parts Categories: The shed assembly is broken down into four main categories:
- Roof Parts (P1, P2, P3, M4, S3, S2, M3, GC, S4)
- Wall Parts (W1A, W2A, W3A, ULA, BR, B1, URA, BL, B2, V1, V2, L3, L1, L2, UP1)
- Door Parts (20, DH, DG, DX1, DL1, DR1, DF)
- Screws (F1, F2, F3, F5)

Usage Features:

Storage: Provides a dedicated space for storing garden tools, equipment, and other outdoor items.
Foundation Recommendation: It is recommended to construct a wooden or concrete base as a foundation for the shed to ensure stability and proper leveling.
Ground Preparation: Before assembly, the ground surface must be leveled.
Assembly Steps: The manual outlines a detailed, step-by-step assembly process, starting with the bottom frame, then walls, roof, and finally the door.
Internal Setup Tips: Several steps include "Internal setup" tips, indicating that certain components or fasteners are installed from the inside of the shed.
Directional Awareness: Tips are provided to "Pay attention to distinguishing the direction when installing" for components like L3, L1, and L2, emphasizing the importance of correct orientation for structural integrity.
Gasket Alignment: For certain steps (e.g., Step 4), users are instructed to "Align the gasket with the hole, and then use the electric drill to drill the V2 into the hole," highlighting the use of gaskets for sealing and the need for a drill.
Screw Hole Alignment: Users are advised to "Please align the screws with the screw holes for installation" to ensure proper fit and secure assembly.
Door Installation: The door assembly involves multiple components, including panels (DL1, DR1), hinges (DH), handles (DG), and bracing (DX1).
Safety Features: The design includes a locking mechanism (DG) for the door to secure the contents of the shed.
Wind Exposure: The manual recommends reducing wind exposure, especially on the door side, when choosing the shed's location.

Maintenance Features:

Regular Checks: Periodically check the shed to ensure it remains stable and that the site remains level.
Secure Installation: It is highly recommended to secure the shed to an immovable object or to the ground by drilling holes in the floor at pre-marked locations and inserting proper screws (screws not included). This enhances stability and prevents wind damage.
Cleaning: Wash the shed with a garden hose and a mild detergent solution. Avoid using stiff brushes or abrasive cleaners, as they could damage the shed.
Roof Maintenance: Keep the roof clean of snow and leaves. Heavy accumulation can damage the shed and make it unsafe.
Door Security: Keep doors closed and locked to prevent wind damage.
Safety Precautions:
- Always wear work gloves, eye protection, and long sleeves when assembling or performing maintenance due to steel edges.
- Do not attempt assembly on days with strong winds or low temperatures.
- Do not store flammable or corrosive substances in the shed.
- Do not store hot items (e.g., recently used grills, blowtorches) in the shed.
- Do not lean heavy articles against the walls, as this may cause distortion.
- Do not stand on the roof.
- Wear safety goggles and follow manufacturer's instructions when using power tools.
Customer Support: Contact saleservice@patiowell.com for assistance, rather than returning the unit to the store. An installation tutorial video is also available online at https://www.patiowell.com/pages/video-t-ps1053s0bna.