Need help?Do you have a question about the Patiowell T-PS22-0096 and is the answer not in the manual?
Ensuring a level ground surface and recommending a base for the shed.
List of tools necessary for the successful assembly of the shed.
Guidelines for safe handling of parts and assembly environment.
Connecting base supports (BS1L, BS1) to the frame using screws (F1).
Securing the base perimeter using screws (F1) to form the shed's foundation.
Ensuring frame alignment and securing corners with screws (F1).
Installing WS2A wall panels to the base frame using screws (F1) and washers (V2).
Connecting parts 9 and C2 with GR to form roof support structures.
Attaching roof beams (part 9) to the wall structure using screws (F1) and washers (V2).
Securing horizontal strips (10L, 10R) to the wall panels using screws (F1).
Attaching roof support pieces (7, 8) to the structure using screws (F1).
Fastening W1A side wall panels to the frame using screws (F1) and washers (V2).
Attaching additional W1A panels to the side walls with screws (F1) and washers (V2).
Reinforcing wall corners with brackets (W1A) using screws (F1) and washers (V2).
Preparing roof sections by attaching parts (21L, 21R, B1, B2, B3, GF) with screws (F2) and washers (V2).
Fastening roof panels (21L, 21R) to the structure using screws (F1) and washers (V2).
Connecting roof track sections (13, 14), noting that 14 is pressed into 13.
Attaching roof tracks to the shed structure with screws (F2), advising not to overtighten.
Attaching remaining roof track sections (13, 14) and reinforcing with B2, B3.
Fastening roof sheets (P1-P5) to the frame with screws (F1) and washers (V2).
Overlapping roof sheets and securing them with screws (F1) and washers (V2).
Securing the ridge cap piece (19) to the roof structure using screws (F1) and washers (V2).
Attaching eave trim pieces (15, 16) to the shed structure with screws (F1) and washers (V2).
Completing eave trim installation using pieces (15, 16) and hardware (GE, F1, V2).
Preparing door components (DLA, DLB, DRA, DRB) with associated parts (DX2, DF, DG).
Connecting door panel sections (DLA, DLB, DRA, DRB) using screws (F2).
Attaching door hinges (DH) to the door panels using screws (F1) and (F3).
Mounting door catch hardware (DC) to the door panels using screws (F1).
Installing latch hardware (DF) on the left door panel using screws (F1, V2, F4).
Reinforcing the door frame structure with part UR1 and screws (F3).
Final securing of components using S1 washers and screws (F1).
Warnings about fire hazards and unsuitable storage of flammable/corrosive items.
Importance of following instructions, checking stability, and consulting authorities.
Recommendations for using safety goggles, power tools, and cleaning agents.
Guidelines on avoiding hot items, heavy loads, and roof maintenance.
Advice on wind direction, keeping doors closed, and not standing on the roof.
General| Brand | Patiowell |
|---|---|
| Model | T-PS22-0096 |
| Category | Outdoor Storage |
| Language | English |
To Next Page