Patlite LCE-A - Page 10

-10-
A
2. NPN(PNP)Transistor drive example
●LCE-□□□A
(
W
)
Type / LCS-□02A Type［Continuous light type］
Yellow wire
Continuous
I/O Unit
Power Supply
External
contact
Fuse
LED White White wire
LED Blue Blue wire
LED Green Green wire
LED Amber Orange wire
LED Red Red wire
24V DC
Yellow wire
24V DC
LED White White wire
LED Blue Blue wire
LED Green Green wire
LED Amber Orange wire
LED Red Red wire
Continuous
I/O Unit
Power Supply
External
contact Fuse
Model
Current capacity
Transistor (NPN or PNP)
Vc≧35V
IL≦0.1mA
Ic≧100mA（LED unit）
Ic≧300mA（Buzzer）
Dielectric break
down strength
Leak current
●LCE-□□□AFB
(
W
)
Type［Continuous light or Flashing, with Buzzer type］
Flashing
I/O Unit
Continuous
I/O Unit
Power
Supply
External
contact Fuse
24V DC
Brown wire
Flashing COM
Gray wire
LED White
White wire
LED Blue
Blue wire
LED Green
Green wire
LED Amber
Orange wire
LED Red
Red wire
Buzzer1
Purple wire
Buzzer2
Skyblue wire
Yellow wire
Continuous COM
LED unit
7. Changing LED unit positions
● Turn the power off before performing this procedure.
● Unscrew the head cover and remove the lens.
● Positions of both up and down LED units are fixed by the central parts(A part). Therefore
please put the A parts of boss sides together to connect the up and down LED units.
● When increasing or decreasing the number of modules, install a new center screw.
(See 3. Part Names.)
Caution
● Do not remove a LED unit forcibly or it may damage the unit.
● Once the center screw is loose or removed, the LED units and the
head cover are unstable. Handle carefully to avoid damage.
● Handle the LED units carefully so they are not warped or damaged
while changing their positions on the tower.
● When the screw of the head cover is tightened too much, it is likely
to damage it. (The tightening torque is about 0.39N･m.)
※ When using FB type, use a separate I/O unit for flashing.
PNP Transistor
(
24V Type
)
1A
1A
1A
1A
Earth wire(Green/Yllow wire)
Black wire
Gray wire
1A
1A
NPN Transistor
(
90～250V Type
)
LED White White wire
LED Blue Blue wire
LED Green Green wire
LED Amber Orange wire
LED Red Red wire
Yellow wire
Continuous COM
Continuous
I/O Unit
Power Supply
External
contact Fuse
NPN Transistor
(
24V Type
)
LED White
White wire
LED Blue
Blue wire
LED Green
Green wire
LED Amber
Orange wire
LED Red
Red wire
Yellow wire
Gray wire
Brown wire
Flashing
I/O Unit
Continuous
I/O Unit
Power
Supply
External
contact
Fuse
Buzzer1
Purple wire
Buzzer2
Skyblue wire
Continuous COM
Flashing COM
24V DC
Flashing
I/O Unit
Continuous
I/O Unit
Power
Supply
External
contact Fuse
LED White
White wire
LED Blue
Blue wire
LED Green
Green wire
LED Amber
Orange wire
LED Red
Red wire
Buzzer1
Purple wire
Buzzer2
Skyblue wire
Yellow wire
Gray wire
Continuous COM
Black wire
Brown wire
Flashing COM
PNP Transistor
(
24V Type
)
NPN Transistor 90～250V Type
)
NPN Transistor
(
24V Type
)
Earth wire(Green/Yllow wire)