Need help?Do you have a question about the Paton StandardMIG-160 and is the answer not in the manual?
Specifies the machine's exclusive design for MIG/MAG, TIG, and MMA welding operations.
Explains how to connect the welding machine to the power grid, including voltage and grounding requirements.
Modulates amperage during arc ignition for better stability and consistent ignition.
Explains the 2T torch button function for short welds, covering gas, start, and stop signals.
Instructions on how to select and unlock functions on the device's control panel.
Details how to save and select up to 16 preset programs within each welding mode.
Outlines user responsibilities, including proper training and familiarization with safety regulations.
General| Input Voltage | 220 V |
|---|---|
| Duty Cycle | 60% at 160A |
| Weight | 15 kg |
| Wire Diameter | 0.6-1.0 mm |
| Spool Size | 5 kg |
| Protection Class | IP21 |
To Next Page
