The Patriot Lighting 52" Fenwick Ceiling Fan, model #20678 (355-0644), is a residential ceiling fan designed for both aesthetic appeal and functional air circulation. This fan features a brushed nickel finish and comes with a remote control for convenient operation.
Function Description:
The primary function of the Fenwick Ceiling Fan is to circulate air within a room, providing cooling in warmer weather and helping to distribute warm air in cooler weather. It offers multiple fan speeds and includes an integrated light kit for illumination. The fan's direction can be reversed seasonally to optimize airflow for different temperatures. The included remote control allows users to adjust fan speed, turn the fan on/off, control the light (on/off, dimming/brightening), and activate a light delay feature.
Important Technical Specifications:
- Fan Size: 52 inches
- Finish: Brushed Nickel
- Net Weight: 14.04 lb (6.38 kg)
- Power Source: Requires connection to a main fuse or circuit breaker.
- Light Kit: Integrated, dimmable LED (when D/CFL switch is set to "D").
- Control: Remote control with multiple fan speeds (High, Medium, Low), fan off, light delay, light control (on/off, dimming), and a reverse switch.
- Mounting: Designed for secure attachment to an outlet box marked "Acceptable For Fan Support."
- Blade Clearance: Blades must be at least 7 feet (2.1 meters) above the floor and at least 18 inches (0.5 meters) from the tip of the blades to the wall.
- Electrical Code Compliance: Installation must comply with the national electrical code, ANSI/NFPA 70-1999, and local codes.
- FCC Compliance: This device complies with Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation.
Usage Features:
- Remote Control Operation: The fan is operated via a dedicated remote control.
- Fan Speed: Three settings: High (III), Medium (II), and Low (I).
- Fan Off: Turns the fan power off.
- Light Control: Tapping the light control button turns the light on/off. Pressing and holding the button dims or brightens the lights.
- Light Delay: Tapping the light delay button will turn off the light after one minute. Tapping the light control button exits this mode.
- Reverse Switch: Located on the remote.
- Warmer Weather: Push the switch left (towards the sun icon) for downward airflow, creating a wind chill effect.
- Cooler Weather: Push the switch right (towards the snowflake icon) for upward airflow, helping to move hot air off the ceiling.
- Important Note: The fan must be stopped completely before moving the reverse switch. The switch must be set fully left or right for correct fan operation; the fan will not operate if the switch is in the middle position.
- D/CFL Switch: Located inside the remote's battery compartment, factory-set to "D" for dimmable LED functionality.
- LEARN Button: Used to sync the remote to the receiver, particularly useful during troubleshooting or initial setup.
- Wall Bracket: A wall bracket is provided for storing the remote control when not in use.
Maintenance Features:
- Regular Screw Checks: All set screws of the fan should be checked and retightened as necessary before installation and periodically thereafter to ensure secure operation.
- Cleaning: When cleaning the fan, avoid bending the blade brackets or inserting foreign objects between rotating fan blades.
- Battery Replacement: The remote control uses a 12-volt battery. An LED indicator on the remote will flash for one minute as a reminder to replace the battery.
- Troubleshooting Guide: The manual includes a comprehensive troubleshooting section for common issues such as the fan not starting, noisy operation, wobbling, or light malfunction.
- Service Department Contact: For problems that cannot be remedied or for installation difficulties, a service department contact number (1-877-459-3267, 9 a.m.-5 p.m. Central time) is provided.
- Wiring Safety: Always shut off power at the main fuse or circuit breaker before installing or servicing the fixture to avoid electric shock. Do not use a full-range dimmer switch to control fan speed, as this can cause humming noise and poses a risk of fire or electric shock.
- Blade Balancing: If the fan wobbles, ensure blades are firmly screwed, blade arms are tightened, and the canopy/mounting bracket are secure. Swapping blades or using a balancing kit can help resolve wobble.
Need help?
General
To Next Page
