Patterson HIGH-5 - Prepare Gearbox Vent

pattersonfan.com
800.768.3985
14
STEP 7 - REMOVE GEARBOX PLUG & INSTALL VENT CAP
Note: This step is required. Failure to remove the plug may cause gearbox
seals to leak due to pressurization of the lubrication fluid, possibly voiding the
manufacturer’s warranty.
1) Remove plug in the gearbox and replace with vent prior to operation of the fan. The vent fitting is in
a bag that is axed to the frame at the location of the plug.
THIS COMPLETES THE
MECHANICAL INSTALLATION
OF YOUR HIGH-5 FAN.
HIGH-5