Need help?Do you have a question about the Patterson HIGH-5 and is the answer not in the manual?
General| Model | HIGH-5 |
|---|---|
| Manufacturer | Patterson |
| Category | Fan |
| Speed | Variable |
| Diameter | 8-24 ft |
| Type | High Volume Low Speed (HVLS) |
Covers installation, servicing, maintenance, and component compatibility warnings.
Lists mechanical parts provided for fan installation.
Lists electrical components provided for fan installation.
Lists safety components included with the fan.
Lists necessary tools for starting fan installation.
Details minimum mounting height and blade clearance requirements.
Covers maintenance for VFD box, gearbox oil, and hub grease.
Covers checking mounting hardware tightness and cleaning fan blades.
Instructions for mounting the fan bracket to an I-beam structure.
Instructions for mounting the fan bracket to bar joists.
Securing the fan assembly to the installed mounting bracket.
Mounting the Variable Frequency Drive (VFD) to the fan frame.
Instructions for installing the required safety cable for the fan.
Procedures for installing guy wires for fan stability.
Attaching fan blades and securing the blade safety bracket.
Final step to remove gearbox plug and install vent cap.
Recommends circuit breaker sizing based on voltage and motor horsepower.
Connecting input power cable and installing the lockable disconnect.
Connecting both ends of the motor control cable to the VFD and fan motor.
Mounting the remote keypad and connecting it to the VFD.
Optional connection of the VFD to a fire suppression system.
Explains master/follower setup and wiring for daisy chaining VFDs.
Steps to scale follower fan speeds to match the master fan.
To Next Page
