Need help?Do you have a question about the Paul NOVUS 450 and is the answer not in the manual?
General| Brand | Paul |
|---|---|
| Model | NOVUS 450 |
| Category | Heating System |
| Language | English |
Details warranty terms, conditions, and manufacturer's liability for the NOVUS unit.
Provides essential safety instructions, warnings, and notes for operating the NOVUS.
Outlines safety appliances, measures, and symbols used throughout the manual.
Describes the NOVUS ventilation unit, its components, and heat recovery features.
Details the specific functions and operations of the LED control panel keys.
Explains the LED signalling for operating and error conditions on the control panel.
Describes the 3.5" TFT display touch panel operation and its buttons.
Details the functions and signals of the TFT touch panel for various modes.
Explains user-adjustable settings within the 'Settings' section of the TFT touch panel.
Outlines routine maintenance tasks performed by the operator.
Provides instructions for checking and replacing the air filters in the NOVUS unit.
Guides users on actions to take in case of device failure or error.
Lists the essential requirements for the correct installation of the NOVUS unit.
Covers the procedures for mounting the NOVUS unit on walls or mounting frames.
Provides guidelines and considerations for connecting air ducts to the NOVUS unit.
Covers essential electrical connection procedures and safety requirements.
Guides through the initial setup and functional testing of the NOVUS unit.
Ensures the unit meets requirements and performs a functional test.
Explains how to set the nominal air volume flow for the ventilation device.
Details setting the nominal air flow using the TFT touch panel.
Details setting the nominal air flow using the LED control panel.
Covers password-protected settings accessible by qualified personnel.
Details password-protected submenus within the 'Setup' menu.
Outlines maintenance and repair tasks for qualified personnel.
Provides steps for inspecting and cleaning the heat exchanger.
Covers error detection, visualization, and treatment methods for the NOVUS unit.
Explains error codes and signalling using the LED control panel.
Details error messages and visualization on the TFT touch panel.
Lists the technical specifications for the NOVUS (F) 300 series.
Lists the technical specifications for the NOVUS (F) 450 series.
To Next Page
