Do you have a question about the PawHut D51-153 and is the answer not in the manual?
Connect the bottom back and front wires to the side wires with tracks facing inward.
Insert casters into the bottom front and back wires, then secure with bolts.
Add the top back and front wires to the lower cage portion using screws.
Connect the side wires to the top back and front wires using four bolts per panel.
Attach the lower top wire into place with bolts on each corner.
Slide the plastic pull pan into the slots located on the lower panels.
Connect the ramps to the bottom of the shelves as shown in the image.
Attach the hammock to the roof and place shelves/ramps inside the cage.
| Brand | PawHut |
|---|---|
| Model | D51-153 |
| Category | Pet Care Product |
| Language | English |
Loading...