What to do if my Payne PA13A/ PW3CA has an indoor unit communication error?
If your Payne Air Conditioner is showing an indoor unit communication error, refer to the diagnostic codes displayed.
What to do if the indoor fan speed of my Payne PA13A/ PW3CA is out of control?
If the indoor fan speed of your Payne Air Conditioner has been out of control for over 1 minute, refer to the diagnostic codes displayed.
What to do if my Payne Air Conditioner's compressor over-current protection has been activated four times?
If the compressor over-current protection has been activated four times on your Payne Air Conditioner, refer to the diagnostic codes displayed.
What to do if over-current protection of the compressor occurs four times in my Payne Air Conditioner?
If over-current protection of the compressor occurs four times on your Payne Air Conditioner, refer to the diagnostic codes displayed.
What to do if my Payne Air Conditioner has an indoor unit communication error (Illuminates simultaneously)?
If your Payne Air Conditioner has an indoor unit communication error (illuminates simultaneously), refer to the diagnostic codes displayed.
What to do if my Payne PA13A/ PW3CA's indoor room temperature sensor is open circuit or short circuited?
If the indoor room temperature sensor on your Payne Air Conditioner is open circuit or short circuited, refer to the diagnostic codes displayed.
What to do if the temp sensor on the indoor evaporator of my Payne PA13A/ PW3CA Air Conditioner is open or short circuited?
If the temperature sensor on the indoor evaporator of your Payne Air Conditioner is open circuit or short circuited, refer to the diagnostic codes displayed.
What to do if my Payne PA13A/ PW3CA Air Conditioner's indoor room temp or evaporator sensor is open circuit or short circuited?
If the indoor room temperature or evaporator sensor on your Payne Air Conditioner is open circuit or short circuited, refer to the diagnostic codes displayed.
What to do if the temp sensor on the outdoor condenser of my Payne PA13A/ PW3CA Air Conditioner is open or short circuited?
If the temperature sensor on the outdoor condenser of your Payne Air Conditioner is open circuit or short circuited (not cooling only modes), refer to the diagnostic codes displayed.
What to do if my Payne PA13A/ PW3CA Air Conditioner outdoor unit protects (outdoor temp. sensor, phase order, etc.)?
If your Payne Air Conditioner outdoor unit protects (outdoor temperature sensor, phase order, etc.), refer to the diagnostic codes displayed.
Warning about personal injury or death due to electrical shock during installation or servicing.
Steps for using a vacuum pump to evacuate the system to remove air and moisture.
Procedure for achieving a deep vacuum using specialized equipment for system evacuation.
Alternate method for system evacuation using vacuum pump and dry nitrogen.
Guides for interpreting LED indicators on the indoor unit to diagnose faults.
Guides for interpreting LED indicators on the outdoor unit to diagnose faults.
General| Brand | Payne |
|---|---|
| Model | PA13A/ PW3CA |
| Category | Air Conditioner |
| SEER Rating | Up to 13 |
| Refrigerant | R-410A |
| Voltage | 208/230 V |
| Phase | 1 |
| Compressor Type | Scroll |
| Type | Split System |
| Fan Motor Type | Permanent Split Capacitor |
| Sound Level (Outdoor Unit) | 76 dB |
To Next Page
