EasyManua.ls Logo

PCchips M922LR V1.1 - Power Management Setup Page

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AGP Mode
This item provides the OnBoard VGA mode with three options of 1,2, 4 multi-
plied frequency.
AGP Aperture Size
This item defines an AGP for the graphics. Leave this item at the default value
64MB.
Auto Detect DIMM/PCI Clock
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI
slots.
CLK Spread Spectrum
Use this item to set the system bus spread spectrum for the installed proces-
sor.
Power Management Setup Page
This page sets some of the parameters for system power management opera-
tion.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
ACPI Aware O/S Yes
Power Management/APM Enabled
Video Power Down Mode Suspend
Hard Disk Power Down Mode Standby
Standby Time Out(Minute) Disabled
Suspend Time Out(Minute) Disabled
Resume Up on Ring Disabled
Resume Up on LAN Disabled
Resume Up on PME# Disabled
Resume on KBC Disabled
Wake up key Any key
Wake up password N/A
Resume on RTC Alarm Disabled
RTC Alarm Date 15
RTC Alarm Hour 12
RTC Alarm Minute 30
RTC Alarm Second 30
ESC : Quit ↑↓←→ : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power management
Interface). Use this item to enable or disable the ACPI feature.
Power Management
Use this item to enable or disable a power management scheme. If you en-
able power management, you can use the items below to set the power
management operation. Both APM and ACPI are supported.
27

Related product manuals