Need help?Do you have a question about the PCTEL SeeGull HBflex and is the answer not in the manual?
Introduction to NB-IoT measurement for KPI metrics.
Overview of NB-IoT physical channels in stand-alone or LTE network spectrum.
Key features of the NB-IoT signal measurement functionality.
Document is a reference manual for SeeGull HBflex features, setup, operation, maintenance.
Describes the SeeGull HBflex scanning receiver's use in walk tests, drive tests, and site measurements.
Describes the SeeGull HBflex as a tool for signal strength and modulation measurement.
Instructions for inspecting the shipping container and contents upon receipt.
Describes optional multi-technology measurements available for the SeeGull HBflex.
Details system requirements for the SeeGull HBflex scanning receiver.
Steps to connect the unit to PC/tablet, UE, and power source for data collection.
Explanation of the LED indicators on the SeeGull HBflex scanning receiver.
Information on factory calibration, recalibration recommendations, and optional service.
Details on upgrading the SeeGull HBflex application program for new features or bug fixes.
How to control the unit and receive measurement data via USB or Bluetooth.
Instructions for TCP/IP communication between HBflex and a control PC via Ethernet.
Explains CDMA/EV-DO holdover operation using GPS data for timing when GPS signal is absent.
Verifying that all necessary antennas are included in the shipment and are correctly marked.
PCTEL offers superior antennas supporting various frequency ranges and technologies.
Information on the OP034H, a standalone high-gain GPS antenna with magnetic mounting.
Details on wireless adapters for Wi-Fi testing, connected via the HBflex USB port.
Describes the IND-CBL-ANT-HB Walk Test Kit for in-building measurements.
Information on the antenna required for Bluetooth communications.
Steps to diagnose and resolve issues when the receiver LEDs are not illuminated.
Procedure for replacing the fuse in the power plug of the scanning receiver.
Potential causes and checks for low received signal strength readings.
Provides phone numbers and email addresses for PCTEL customer support and quality management.
Details PCTEL's warranty terms for product defects in material and workmanship.
Recommendation to recalibrate the SeeGull HBflex scanning receiver every 2 years.
Procedure for obtaining an RMA for repairs or returns of the scanning receiver.
General| Instantaneous Bandwidth | 20 MHz |
|---|---|
| Receiver Type | Software Defined Radio (SDR) |
| Tuning Resolution | 1 Hz |
| Input Impedance | 50 Ohms |
| Bandwidth | 20 MHz |
| Phase Noise | -110 dBc/Hz @ 10 kHz offset |
| Weight | 2 lbs |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Connectivity | USB |
| Dynamic Range | 100 dB |
| Frequency Range | 350 MHz to 6 GHz |
To Next Page
