PDA Pro-Range Instructions • Approved Doc. No. DCP0003168 Rev 1 • Page 2
Important notes
These instructions are general and cannot be considered to cover every aspect of
audio-frequency induction loop system design and installation.
We recommend you read BS7594 (The Code of Practice for Audio-Frequency Induction
Loop Systems) and EN60118-4 (Magnetic field strength in audio frequency induction loop
systems for hearing aid purposes), copies of which are available from the British Standards
Institute, Customer Services Department, 389 Chiswick High Road, London W4 4AL.
Tel: +44 (0)20 8996 9000. Web: www.bsi-global.com. It should be noted that all of the
above documents can be subject to update or revision at any time and we recommend you
check the status of them with the British Standards Institute before designing or installing
the system.
Other National standards of design, installation and commissioning should be referenced
where pertinent.
No responsibility can be accepted by the manufacturer or distributors of this equipment for
any misinterpretation of an instruction or guidance note or for the compliance of the
system as a whole.
This induction loop amplifier MUST be installed and maintained by a suitably skilled and
technically competent person.
This document must not be left accessible to the user.
Equipment guarantee
This equipment is not guaranteed unless the system is installed and commissioned in
accordance with National standards by an approved and competent person or organisation.
IMPORTANT : THE INDUCTION LOOP AMPLIFIER SHOULD NEVER
BE OPERATED WITHOUT A LOOP CONNECTED TO IT.
This product has been manufactured in conformance with the requirements of
all applicable EU directives.
To Next Page
Loading...
