PDP 051-038-NA User Manual

2. From the PS4™ system menu, select Settings -> Devices -> Bluetooth Devices
3. On the Universal Media Remote, press the PS4 device key
4. Next, press and hold the SHARE button and the PS button simultaneously until
the red LED begins to flash
5. Place the remote close to the PS4™ system and wait for “PDP Universal Media
Remote for PS4” to appear in the device list.
6. Using a connected controller, select “PDP Universal Media Remote for PS4” from
the list, and press the X button. When prompted, select “Yes”.
7. The red LED on the remote will illuminate for 3 seconds and then turn off,
indicating successful pairing.
Tips
 For the latest PS4™ usage instructions, refer to the user’s guide for the PS4™
system (manuals.playstation.net/document/).

For the latest Universal Media Remote instructions, refer to the online user’s
guide (support.pdp.com).
 Only one Universal Media Remote can be registered with the PS4™ system at a
time.
 When you pair the Universal Media Remote with another PS4™ system,
registration with the original PS4™ system is cleared. To use the remote with the
original PS4™ system, you will have to follow the pairing procedure again.
How to use the Universal Media Remote
DEVICE buttons
Switch between devices.
PS4™ system button Switch the remote to operate the PS4™ button
TV button Switch the remote to operate a TV
AMP button Switch the remote to operate an AV amplifier
CBL button Switch the remote to operate a cable/satellite set-top box
Buttons for operating a PS4™ system, TV, AV amplifier, or cable/satellite set-top box
The meaning of the icons shown in the table below is as follows:

PDP 051-038-NA Specifications

General

Brand	PDP
Model	051-038-NA
Category	Remote Control
Language	English