Product Overview & Manual
Model No.: 048-136-NA (Xbox One/Xbox Series X)
LVL30 Chat Headset
Communicate with your team on a whole new level with the PDP Gaming LVL30!
Designed for long gaming sessions, the LVL30 Wired Chat Headset features a comfortable,
lightweight build. No need to take a break from this chat headset with a design that makes it
possible to wear the mono 30mm driver on either the right or left ear.
Call out your commands through the flexible, noise-cancelling microphone, or flip it up for instant
mic mute. With the on-ear volume controls, you can make quick audio adjustments without missing
a target.
Features
• Compatible for use on the left or right ear
• Comfortable, lightweight build for long gaming sessions
• Flexible, noise-cancelling mic boom with flip-to-mute feature
• Hear chat loud and clear with a 30mm high-definition mono driver
Xbox - How do I set up my headset to get chat audio only?
The XBOX should recognize the LVL30 headset as a communicator and therefore a chat headset
ONLY. But if it does not then there are ways to adjust the audio to get you chat only.
If using an Afterglow controller, adjust the audio mix according to the instructions in your manual.
If you are using a chat adapter, adjust the audio mix accordingly on the adapter.
If direct to the controller via 3.5mm try the steps below:
1. Sign into your profile
2. Connect the headset back to your controller.
3. On your Xbox one controller double tap the Xbox button
4. Scroll to the settings icon.
To Next Page
Need help?
General
