12
Do not use the product if the
cable or the plug have been
damaged.
WARNING - HOT SUR-
FACES! HAZARD OF
BURNS!
The heating ele-
ment
7
can become very
hot.
To prevent injuries, do not
touch the heating element
7
immediately after shrink-
wrapping.
Do not leave the device unat-
tended when it is switched
on.
Always place the device on a
at, solid and heat-resistant
work surface during use.
Carefully read the operating
instructions before use.
Only operate the device in-
doors. Do not use it outside
or in a damp environment.
Do not use the device in
conjunction with an extension
cable.
Keep the device and cable
away from high temperatures
and warm or damp environ-
ments.
The device does not require a
lubricating agent. Do not use
an organic solvent to clean
the device.
To prevent pressure on the
rubber seal
8
do not close
the cover of the device after
use.
To prevent damage to the de-
vice, the vacuum tube cannot
be cleaned. Please do not
vacuum food products which
contain a lot of water.
To prevent injuries, do not
open the cover or touch the
vacuum chamber
11
when
the device is connected to the
power supply.
Parts description
1
Stop button
2
Vacuum seal button
3
Heat seal button
4
Cover release (left and right)
5
LED-Display
6
Heat seal surface
7
Heating element
8
Seal
9
Cutter
10
Vacuum pump vent
11
Vacuum chamber
Scope of delivery
1 Vacuum Sealer
1 Starterpack
1 Operating instructions
Before rst use
Remove all packaging material before rst
use.
English
To Next Page
Loading...
