Need help?Do you have a question about the Peachtree nova 300 and is the answer not in the manual?
General| DAC Resolution | 32-bit/384kHz |
|---|---|
| Type | Integrated Amplifier |
| Subwoofer Output | Yes |
| Frequency Response | 20Hz - 20kHz |
| DAC | ESS Sabre32 |
| USB Input | Yes |
| Inputs | USB, Optical, Coaxial, RCA |
| Outputs | Speaker, Preamp |
| Analog Inputs | RCA |
Controls the AC power connection to the unit.
Connects to AC power; houses a replaceable fuse.
Accepts 3.5mm input for IR repeater/distribution systems.
Enables power control of other products via 12V trigger.
Reserved for service use; can provide 5V DC to USB devices.
Accepts digital audio input from compatible mobile devices.
Accepts digital audio input from computers up to 384kHz/DSD.
Toggles USB-B input between USB 2.0 and USB 1.0 compatibility.
Accepts S/PDIF digital audio input from a coaxial output.
Accepts S/PDIF digital audio input from optical outputs.
Allows insertion of an audio processing device into the signal path.
Provides analog audio output for powered subwoofers or amplifiers.
Accepts analog input or Home Theater Bypass from SSP/AVR.
Accepts analog input or phono input from turntables.
Accepts the ground connection from a phonograph/turntable.
Speaker binding posts accepting various connector types.
Toggles the unit between On mode and Standby mode.
Selects the USB-B input and indicates status.
Selects the USB-A input and indicates status.
Selects the COAX input and indicates status.
Selects OPT-1 and OPT-2 inputs and indicates status.
Selects AUX-1 input or Home Theater Bypass mode.
Receives Infra-Red commands from remote controls.
Selects AUX-2 input or PHONO input mode.
Engages or disengages the LOOP OUTPUT/INPUT.
Controls output level, mute, and indicates volume via LEDs.
1/4" headphone jack that mutes speaker and preamp outputs.
Toggles the unit between On mode and Standby mode.
Mutes and un-mutes audio outputs.
Increases and decreases the output level.
Adjusts the front panel LED brightness.
Adjusts the LED brightness of the optional Bluesound NODE 2i.
Controls playback for compatible USB connected devices.
Selects the USB-B input.
Selects the USB-A input.
Selects the COAX input.
Selects OPT-1 and OPT-2 inputs.
Selects AUX-1 input or Home Theater Bypass mode.
Selects AUX-2 input or PHONO input mode.
Engages or disengages the LOOP OUTPUT/INPUT.
Selects presets for the optional Bluesound NODE 2i.
Details product warranty terms, duration, and registration.
Outlines procedures for product failure, returns, and shipping.
To Next Page
