Peak Performance PKC0J5 - Fire and Explosion Hazards; Burn Hazards

3
Fire / Explosion Hazards
• NeveroperatetheHeater/Defrosternearammablematerialsorammablegases,vaporsorfumes.
• Insert the 12-volt DC adapter power plug as far into the 12-volt DC cigarette lighter/accessory
socket as possible. Twist the plug slightly to ensure good contact is made. Poor contact may damage
the 12-volt DC adapter power plug and/or the Heater/Defroster, and result in poor performance and
possiblyare.
• NeverallowtheHeater/Defrostertobeexposedtore,directameorhigh-heatsources.
• Never block the Heater/Defroster air inlet vent/fan or heat outlet vent.
• Always operate the Heater/Defroster in a well-ventilated area.
• Never place objects or materials in the Heater/Defroster air inlet vent/fan or heat outlet vent.
• Never operate the Heater/Defroster while unattended.
• Secure the Heater/Defroster in a solid manner before operating in a permanent mount manner.
• Never allow the 12-volt DC adapter power cord to come near the heat outlet vent.
Burn Hazards
• Never touch the Heater/Defroster vents when the Heater/Defroster is operating.
• Do not place any body part or any materials near or directly in front of the Heater/Defroster heat
outlet vent when the Heater/Defroster is operating.
All safety messages that follow have NOTICE level hazards. Failure to comply
could result in personal property damage.
• AlwaysturntheHeater/Defrosteroanddisconnectthe12-voltDCadapterpowerplugfromthe
power supply when not in use.
• Do not disassemble the Heater/Defroster or remove any parts. This Heater/Defroster contains no
serviceable or replaceable parts.
• Clean the Heater/Defroster regularly (see page 7 for care instructions).