7
CARE AND MAINTENANCE
FIRE HAZARD
Do not use combustible cleaners to clean the Heater/Defroster.
ELECTRIC SHOCK HAZARD
Always disconnect the Heater/Defroster from its power source before cleaning.
BURN HAZARD
Allow the Heater/Defroster to cool completely before cleaning.
• Unplug the Heater/Defroster 12-volt DC adapter power plug from the power supply and allow the
Heater/Defroster to cool before attempting to clean.
• Only use a soft cloth moistened with a mild solution of water and detergent on the outer surface of
the Heater/Defroster when cleaning. Dry thoroughly with a clean cloth. Do not allow excess water or
liquids to enter the Heater/Defroster housing.
Fuse Replacement
1. Disconnect the 12-volt DC power adapter from the 12-volt DC power supply.
2. Replace the in-line fuse with equivalent 15-amp blade-type fuse.
Recycling / Disposal
This device contains materials that must be disposed of properly when the device
is discarded. Contact your local government recycling authority for proper disposal methods.
This Heater/Defroster is designed to provide years of service. However, at the end of its
useable life, please DO NOT discard into residential or commercial trash. Materials used
in this product must be recycled or safely disposed of at a recycling center. Contact your
local, county or municipal recycling center for additional information.
SPECIFICATIONS
1. Power Source 12 volts DC at 15A or higher
2. Current Draw 13A
3. Fuse 15A
4. Maximum Heater Temperature 199°F (93°C) measured at air exhaust vent
5. Length of Power Cord 78.7 in. (2 m)
To Next Page
Loading...