In case you discover that the sensor wiring is insufficiently long, utilize the
provided wire extensions to elongate the inner sensor cable.
3. Run factory parking sensor and camera loom.
Peak M1 Nighthawk Installation Manual 14
Be sure to face the rubber isolator plate with the rubber facing down.
2. Install STEDI fog lights to bar. Please refer to diagram for correct bolt
placement.
SINGLE DAMPENER
STAINLESS MOUNTING
BRACKET
WASHER
WASHER
NUT
SHOCK DAMPENER
CAP SCREW
BOLT
SPRING WASHER
STAR WASHER
BOLT
To Next Page
Loading...
