7.5. Display Setting
The DISP SET menu is described in the following table.
The vector drawing mode shows the waveform as a smooth line, connecting
each data point.
The dot drawing mode shows the waveform as a collection of independent
data points.
OFF
1sec
2sec
5sec
Infinite
The persistence setting sets how long the old waveforms remain in the
display, useful for observing the waveform variations.
The data transmitted in communication are bitmaps.
The data transmitted in communication are vectors.
To set up cymometer limit to "ON" status.
To set up cymometer limit to "OFF" status.
7.5.1. Display Style
The display style includes Vector and Dot displays, shown as the following figure 39, figure 40.
Figure 39: Dot Style
Figure 40: Vectors Style
-100-
To Next Page
Loading...
