Need help?Do you have a question about the PeakTech 2700 and is the answer not in the manual?
General| Model | PeakTech 2700 |
|---|---|
| Category | Test Equipment |
| Type | Digital Multimeter |
| Display | LCD |
| Voltage Range (DC) | 200 mV / 2 V / 20 V / 200 V / 600 V |
| Current Range (AC) | 200 µA / 2 mA / 20 mA / 200 mA / 10 A |
| Current Range (DC) | 200 µA / 2 mA / 20 mA / 200 mA / 10 A |
| Resistance Range | 200 Ω / 2 kΩ / 20 kΩ / 200 kΩ / 2 MΩ / 20 MΩ |
| Capacitance Range | 2 nF / 20 nF / 200 nF / 2 µF / 20 µF / 200 µF |
| Temperature Range | -20 °C to 1000 °C |
| Diode Test | Yes |
| Continuity Test | Yes |
| Battery Test | Yes |
| Frequency Range | 20kHz |
| Battery Type | 9V |
| Safety Standards | EN 61010-1 |
Key safety instructions to ensure safe operation and prevent hazards.
Guidelines for cleaning the instrument cabinet and proper storage.
Explanation of standard electrical symbols used on the instrument.
Details on the operation of HOLD and Backlight buttons.
Procedure for measuring effective resistance of earth electrodes.
Instructions for performing DC/AC voltage and 200 kΩ resistance measurements.
Step-by-step guide for replacing the instrument batteries.
Information on battery disposal and relevant regulations.
To Next Page
