7.14 System State Menu
The system state menu is used to display information about the present horizontal system, vertical system, trigger system
and others.
The operation steps are shown as below.
1.) Press the MENU key and the function menu is displayed at the right of the screen.
2.) Press the MENU▲ or MENU▼ key to select the SYS STAT. Four options appear at the bottom of the screen.
3.) Sequentially press key F1 through F4 key and the corresponding state information will be shown on the screen.
The screen that looks like the following figure 58 will be displayed.
Figure 58: System State
-117-
To Next Page
Loading...
