PeakTech 5615 User Manual

-20-
4. Measurement
The measured temperature in the middle of the display is displayed
in the upper left corner of the screen. The setting of the radiation
coefficient (emission factor) is displayed in the lower right corner of
the screen. Move the unit until the heat source or cold spot matches
the center of the screen. Direct the device to the object whose
temperature is higher or lower than the surrounding temperature to
get the optimum measurement results.
Center – Temperature
°C/°F, SD and Battery
status
Color Code
System Time
Emission Factor
Cold-Spot / Min value
Hot-Spot / Max value
Min/Max Values
Center- Marker
Thermal Image

PeakTech 5615 Specifications

General

Brand	PeakTech
Model	5615
Category	Thermal cameras
Language	English