ASAHI/AMERICA, INC 655 ANDOVER STREET LAWRENCE, MA. 01843 TELEPHONE 800-343-3618
Location: assembly/manuals Series 92 A/C Modulating Svc Manual Gen II Rev. A 11/15/19
Page 26 of 26
the responsibility of the furnishing distributor to provide translated copies of this
O & M manual
Maintenance
Disconnect power!
NEVER REMOVE ACTUATOR COVER WHILE CIRCUITS ARE LIVE!
CAUTION: It is imperative for reducing the chance of electrical shock, and to
prevent ignition of hazardous atmospheres that you
Disconnect power
before any maintenance or repairs are performed.
Series 92 actuators are virtually maintenance free. We do however, recommend
that periodic checks are made to ensure that all fasteners are tight and properly
torqued to extend the life of the actuator and valve.
Series 92 Actuators are manufactured with factory lubricated grease in the gear
case and gearbox. In most cases, this lubricant should never have to be
replenished, however if deemed necessary, we recommend using Aeroshell
Grease #17, mfg. by Shell Oil Co.
Consult our technical department before replenishing lubricant.
For outdoor or wet locations keep top and bottom seals coated with a silicone
based grease.
Spare Parts
Reference Drawing #289S92
We recommend that the following be kept on hand as spare parts.
1 --- Limit Switch (Part #25)
1 --- Capacitor (Part #27 or #28)
NOTE: When ordering replacement motor parts and/or options specify model
number, serial number, and supply voltage.
Attachments:
8 drawings: 0107BV, 0113BV,0130BV, 0168BF,
0200BF, 289S92, M00EL381, M00EL382
To Next Page
Loading...
Need help?
General
