Peaq PBR110 - Player Setup and Settings

ENGLISH
41
SETUP
Press SETUP to get back to the root menu.
NOTE: The root menu will display on the
screen automatically, under No Disc or Stop
situations.
AUDIO
Press AUDIO to display information menu.
Press to select the mode of audio
and confirm with ENTER.
NOTE: This function depends on disc.
VOLUME
Press VOL + to increase the volume.
Press VOL – to decrease the volume.
A B C D
The RED, GREEN, YELLOW and BLUE
buttons are used with interactive menus
when operating a BD-Video disc that in-
cludes JavaTM applications (BD-J). For
more information about operating this kind
of disc, please read the instructions that
came with the disc.
RESOLUTION
The output for HD playback can be set to
the following resolutions by pressing the
RESOLUTION button:
HDMI Auto, 1080p, 1080i, 720p, 576p,
576i
NOTE: HDMI Auto detects the highest pos-
sible resolution automatically. 1080p is only
available at HDMI output.
PIP
Some BD and DVD discs contain scenes
recorded with dierent cameras from dier-
ent angles. Press PIP to display the angle
window. Use to select ON or OFF and
confirm with ENTER.
SECONDARY AUDIO
To turn audio on/o with the secondary vid-
eo, press SECONDARY AUDIO to display
information menu. Use to select
ON or OFF and confirm with ENTER.
NOTE: Only the primary video is played dur-
ing search or frame-by-frame play. PIP func-
tionality is also known as BonusView.
MUTE
To switch of the volume temporarily, press
MUTE button. The display will show MUTE
ON. Press MUTE button again to resume at
preset volume.