48
NETWORK SETUP
Link Status: The link status menu items
show if the current network is connected or
not.
MAC address: The hardware address of the
Ethernet interface is displayed.
IP Mode: The IP Mode option provides three
configuration modes for IP.
Dynamic: Enables DHCP. Recommeded
method for automatic network setup con-
figuration.
Manual: Requires user to configure network
settings such as IP address, subnet mask,
gateway, etc.
IP address and other settings:
If „Manual“ is choosen in the IP Mode set-
ting, the network connection can be adjust-
ed to your requirements. IP addresses for
the Subnet Mask, Gateway, Primary DNS
and Secondary DNS can be set individually.
BD-LIVE SETUP
BD-Live Internet Access: Provides three
options.
Limit Access: Allow BD-Live network access
except when there are Case-1 and Case-2
errors from a DRM-certified network con-
nection. This check is performed at disc in-
sertion.
Always Allow Access: Always allow BD-Live
Internet access regardless of Case-1 and
Case-2 errors.
Prohibit Access: Never allow BD-Live Inter-
net access.
BD-Live Storage: To show the available ca-
pacity for BD-LIVE storage, press ENTER to
display the option for deleting BD-LIVE files.
Erase Blu-ray Storage: To delete any BD-
Live content that has been downloaded
from the internet.
To Next Page
Loading...