EasyManua.ls Logo

Peaq PBR110 - Specifications; Intended Use

Peaq PBR110
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
56
Specifications
DISPOSAL
The crossed-out wheeled bin logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Electric and electronic equip-
ment may contain dangerous and hazard-
ous substances. Do not dispose of this ap-
pliance as unsorted municipal waste. Return
it to a designated collection point for the re-
cycling of WEEE. By doing so, you will help
to conserve resources and protect the envi-
ronment. Contact your retailer or local au-
thorities for more information.
INTENDED USE
This appliance is intended for recieving and
playing audio and video signals. Only use
according to these instructions. Improper
use is dangerous and will void any warranty
claim. Observe the safety instructions.
VF Signal system NTSC/PAL
Video output Electric level output: 1.0Vp--p, Resistance 75KΩ
Output connector: Pin jack (1 system)
Audio output Output level: 2 Vrms (1 kHz, 0 dB)
Output connector: Pin jack
Numer of Connectors: 2 channel: 1 system
Audio output (analog audio) Coaxial digital output: Pin jack
Audio performance Frequency response: 20Hz~20kHz
S/N ratio: 90 dB
Dynamic range: 80 dB
Total harmonic distortion: 0.004%
HDMI output Output format: 480i/480p/576i/576p/720p/1080i/1080p
Rated input 110-240 V~ / 50/60 Hz
Power consumption 17 W
Dimensions (W x H x D) 430 x 40 x 230 mm
Weight 2.4 kg
Operating temperature 5°C - 35°C
Operating humidity 10% - 80%
USB rating 5V 500 mA