Peavey PC1600X

12
Peavey PC1600X User Manual (rev-h)
Front Panel
------------------------------------------------------------------------------
1. 16 Faders:
Each of the programmable faders can be assigned the following functions: No Message, Continuous
Controller, Master fader, MIDI string.
2. 16 Buttons:
Each of the programmable buttons can be assigned the following functions: Fader ID, Fader Mute,
Fader Solo, Program Change, Note-on/Note-off, MIDI String, MIDI String, Press and Release, MIDI String
Toggle, Send Fader, Send Scene.
3. Data Wheel:
This is a high-resolution device, which allows fine adjustment of any fader or control voltage value. The data
wheel can be linked to a fader or Control Voltage input and duplicate its programming. It can also transmit
the value of the last fader moved.
4. Display Window:
This is a 20 character by 2 line, Liquid Crystal Display (LCD) with adjustable contrast.
5. Direction Buttons:
The Up, Down, Left, Right direction buttons are used to navigate through the user interface. The Up/Down
buttons also serve as increment and decrement buttons to edit parameter values and chance presets. The left
arrow button also doubles as a MIDI mute button.
6. Edit Button:
This button accesses all parameters stored within a preset.
7. Utility Button:
This accesses all global functions of the PC1600X.
8. Copy Button:
The Copy button is used to copy from one preset or scene to another. It is also used to copy individual
messages.
9. Scene Button:
Scenes are “snapshots” of the current fader and CV values. in addition to the current preset number.
This button is used to save, store and initialize.
10. Enter button:
This button is used to execute functions whenever “Enter” appears in the Upper or Lower right hand corner
of the display. When the main page is displayed, pressing this button sends the current message for each
fader and CV input. The display will read “Sending Faders/CV’s.”
11. Exit button:
This button is used to escape from any menu. Pressing Exit several times will always return you to the main
page. Pressing Exit from the main menu page can reset the controller filtering of the update/replace merge
modes. The display will read “Replace/update reset.