14
Peavey PC1600X User Manual (rev-h)
Back Panel
------------------------------------------------------------------------------
1. Power Supply Input:
Use only the 16 (VAC) 1000ma adapter provided. (Peavey part#: 709006601)
Caution:
Use only the 16VAC Power Supply provided with this product. If the original Power
Supply must be replaced, consult your Peavey dealer or the factor for the correct replacement. Failure
to use the correct Power Supply could result in fire, shock hazard, extensive circuit damage,
decreased performance, non-operation loss of gigs, frustration, cursing, marital problems and an all-
around bad day.
2. Power Switch:
Turns the PC1600X On and Off.
3. CV 2 / Footswitch 1 & 2:
This input accepts a control voltage foot pedal in addition to a single or dual footswitch. The foot
pedal is programmable per-preset and functions the same as a fader. Each footswitch can be assigned
to one of the following functions: up (Inc.), down (Dec.), “Enter” or duplication of a button (1-16)
Polarity is automatically detected at Power-On.
4. CV 1:
This input accepts a control voltage foot pedal and is programmable to function the same as a fader.
5. MIDI OUT:
This transmits all data generated internally. This also acts as a MIDI THRU for all unfiltered
messages received by the PC1600X.
6. MIDI IN:
This accepts commands to be interpreted by the PC1600x. It also accepts data to be echoed to the
MIDI OUT back.
To Next Page
Loading...