EasyManua.ls Logo

Peavey PV 1 VHF

Peavey PV 1 VHF
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Frequency Response 40-20,000Hz, +/- 3dB
Dynamic Range 120dB
Total Harmonic Distortion <0.3%
Frequency Stability +/- 0.005%, Crystal controlled
Modulation FM (F3E), +/-20KHz max.
Operating Range Up to 250 ft. typical (depending on site conditions); up to 500+ feet
optimum line of sight
TRANSMITTERS
Audio Inputs
PV®-1 Peavey neodymium dynamic cartridge
PV-1 3.5mm mono locking jack for connecting to omni or unidirectional lavalier mic or
unidirectional headset mic, with phantom power (PV-1); or connecting to instrument cable
(PV-1)
Controls
PV-1 OFF/ON switch
PV-1 OFF/ON switch, input level adjust
LED Indicator UnitON” (single flash)
Low Battery Alert (Steady)
RF Power Out 50mW (max. allowed by FCC)
Harmonic & Spurious Emissions> -
Battery 9V Alkaline Handheld – 2) AA Body Pack
Battery Life up to 15 hours
Dimensions 4.2 x 2.5” .88
(10.7 x 6.4 x 2.2 cm)
9.5x 1.37
(24.1 x 3.48 cm)
Weight 3 oz (84g) – 7.5 oz (210g)
RECEIVER
Reception ModeDi v er si t y
Controls – Power ON/OFF, volume control, mute control
Connectors – Balanced XLR and unbalanced adjustable ¼” audio jacks, 2.1mm barrel-
type DC input jack
LED Indicators – Power ON, 4 LED RF & AF level displays, A/B Diversity
Power Requirements 12V @ 400mA, nominal, AC/DC adapter supplied
Features and specifications subject to change without notice.
SPECIFICATIONS