Need help?Do you have a question about the Peavey Renown 400 and is the answer not in the manual?
Describes the high and low gain input connectors for guitars and other instruments.
Details Pre Gain, Pull Bright, Saturation, and Post Gain for the lead channel.
Covers Automix, Channel Status LED, and Low Frequency EQ for channel selection and tone.
Explains Mid EQ, Shift, High EQ, Pull Thick, and Presence for advanced tone control.
Details Pre Gain, Pull Bright, Channel Status LED, and Post Gain for the normal channel.
Covers Low Frequency EQ, Paramid™, and Frequency Shift for fine-tuning frequencies.
Describes the active high EQ control and the Master Reverb effect.
Details the Power LED indicator and the Power Switch for operating the amplifier.
Explains the Ground Switch, Line Cord, and Speaker Jacks for safe operation.
Describes the Preamp Out/Power Amp In jacks for connecting external effects devices.
Details the jack for connecting a remote footswitch for channel selection and effects.
Provides technical specifications for power output, frequency response, and distortion.
Covers the one-year and 90-day warranty periods for the product and its components.
Outlines conditions that void the manufacturer's warranties.
Provides instructions on how to register the product for warranty service.
To Next Page
General
