Need help?Do you have a question about the Peavey Reno 400 and is the answer not in the manual?
Details on input jacks, sensitivity, and pre/post gain adjustments.
Allows external effects insertion before the equalization stage.
Covers Low, Mid, Shift, High, Presence EQ, and Reverb controls.
Explains DDT compression, DDT LED, and Pilot LED operation.
Details the main power switch and polarity selection for grounding.
Jacks for external effects loop or direct connection to other equipment.
Allows remote switching of reverb and system muting.
Power connection cable with grounding pin for safety.
Recommended settings for a bright tone with steel string guitars.
Recommended settings for a mellow tone with steel string guitars.
Recommended settings for guitars using bronze strings.
Recommended settings for nylon or gut string guitars.
Details on power output, clipping, frequency response, and distortion.
Specs for preamp gain, input levels, impedance, and output levels.
Specs for effects loop, preamp output, and power amp input.
Specs for system hum/noise, equalization ranges, and footswitch functions.
To Next Page
General
