Peavey SRC 1600/2400 - User Manual

Details Gain, High, Mid/Frequency, and Low equalization controls for each channel.

Covers AUX A, B, C, D, E, F sends, PRE/POST switching, and AUX A/B return levels.

Explains the PAN control and L-R, 1-2, 3-4 assignment switches for signal routing.

Details the channel level fader, LIMIT LED, and submaster LED level indicators.

Controls the level and stereo panning for the AUX A Return signal.

Controls the level and stereo panning for the AUX B Return signal.

Manages AUX C return assignment to other buses and its signal level.

Manages AUX D return assignment to other buses and its signal level.

Manages AUX E return assignment to other buses and its signal level.

Manages AUX F return assignment to other buses and its signal level.

Controls the level and stereo panning for Submasters 1, 2, 3, and 4.

Switches for routing Sub 3/Left and Sub 4/Right outputs.

Controls the overall mix level for the Left and Right main outputs.

On/Off power switch and XLR jack for optional gooseneck lamp.

Adjusts stereo output signal level and overall mono mix level.

Controls headphone output level and PFL signal monitoring.

Controls signal level for each of the six AUX sends with PFL switches.

Details master inputs for patching signals and mono/stereo outputs.

Describes PFL patching capabilities and line input options.

Explains inputs and outputs for Right and Left Master sections.

Details inputs for patching external signals and outputs for the AUX A mix.

Details inputs for patching external signals and outputs for the AUX B mix.

Details inputs for patching external signals and outputs for the AUX C mix.

Details inputs for patching external signals and outputs for the AUX D mix.

Details inputs for patching external signals and outputs for the AUX E mix.

Details inputs for patching external signals and outputs for the AUX F mix.

Provides outputs from all four Submasters for external devices.

Inputs for completing effects patch loops for individual Submasters.

Details PATCH PRE, LOW Z IN, and LINE IN connectors for patching.

Covers STEREO OUT and PHANTOM POWER ON/OFF switch.

Details input noise, frequency response, distortion, impedance, and EQ.

Covers master calibration, output levels, headroom, and impedance.

Provides noise figures for SRC 1600 and SRC 2400 models.

Details AUX return impedance, gains, headphone characteristics, and power.

Lists weight and physical dimensions for SRC 1600 and SRC 2400 models.

Details the one-year and 90-day limited warranties and exclusions.

Provides instructions for completing and mailing the warranty registration card.

Covers basic cautions for using electric products, ventilation, and power cords.

Specifies when to seek qualified service and user maintenance advice.

Warns about exposure to high noise levels and recommends hearing protection.