Need help?Do you have a question about the Peavey S 4 and is the answer not in the manual?
General| Brand | Peavey |
|---|---|
| Model | S 4 |
| Category | Music Mixer |
| Language | English |
Warning about hearing loss from high noise levels and OSHA guidelines.
Overview of the Sanctuary Series S-4 automatic mixer and its features.
Explanation of the Automix™ technology and priority feature.
Lists key features of the channel and master sections.
Adjusts input preamplifier gain for channel operating level.
Indicates signal presence, overload warning, or mute status.
Assigns priority for wireless or pulpit mics to manage comb filtering.
Selectable filter to reduce low-frequency noise and rumble.
Sets the point where the soft-knee compressor begins gain reduction.
Adjusts midrange frequencies to improve clarity or reduce muddiness.
Indicates channel activity, Automix status, or PFL monitoring.
Adjusts channel level in the main output, part of Automix.
Mutes the channel in main and direct outputs.
Pre-Fader Listen switch for monitoring channel signal.
Indicates main output signal level or channel PFL level.
Stereo jack for headphone monitoring.
Sets headphone volume and switches to PFL bus.
Indicates phantom mic supply status.
XLR balanced microphone input with phantom power.
1/4" balanced input for line-level sources.
Switchable jack for channel insert or direct output.
Switches the INS/DIR jack function.
Selects automatic or manual operation for channels 3 and 4.
Attenuator for main outputs to match operating levels.
Independent balanced and unbalanced outputs.
Connects multiple S-4 mixers for expanded input capability.
Applies phantom power to XLR mic inputs.
Power connector and safety warning for the mains cord.
Using the S-4 as the primary mixer for a sound system.
Using the S-4 as a secondary mixer to enhance an existing system.
Using the S-4 to control automixing via console direct outputs.
Using the S-4 direct outputs for automix control when console outputs are unavailable.
Initial setup steps for gain adjustment and system connection.
Procedure for setting levels when S-4 is the main mixer.
Procedure for setting levels when S-4 is a submixer.
Steps for setting levels when using console direct outputs for automix.
Steps for setting levels when using S-4 direct outputs for automix.
Final adjustments for channel levels, EQ, and compression.
Technical input parameters including impedance, gain, and levels.
Technical output parameters including load impedance, levels, and connectors.
Details what is covered by the Peavey warranty.
Lists items and conditions not covered by the warranty.
Specifies who is covered by the warranty.
Outlines the duration of coverage for different product categories.
Explains what Peavey will do for covered repairs.
Instructions on how to get warranty service.
Limits on implied warranties like merchantability.
Limitations on liability for incidental or consequential damages.
To Next Page
