Need help?Do you have a question about the Peavey PVi 8500 and is the answer not in the manual?
General| Type | Powered Mixer |
|---|---|
| Channels | 8 |
| Microphone Inputs | 4 |
| Line Inputs | 4 |
| Phantom Power | Yes |
| Built-in Effects | Yes |
| Effects | Digital effects processor |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 90 dB |
| Cooling | Fan-cooled |
| Power | 500 Watts |
| Inputs | XLR and 1/4" |
| EQ | 3-band |
| Output Connectors | 1/4" and XLR |
Covers essential safety measures for operation, placement, cleaning, and avoiding hazards like heat sources and improper plug use.
Details on proper servicing, grounding, avoiding liquids, and handling the on/off switch to prevent electrical hazards.
Information on the risks of high noise levels and recommended hearing protection measures according to OSHA standards.
Instructions for correct disposal of the product to prevent environmental harm and promote resource reuse.
Details FCC rules, operating conditions, and manufacturer's disclaimer regarding modifications and interference.
Lists the primary features and technologies of the PV®i 8500 mixer, including EQ, effects, and connectivity.
Specifies the necessary clearance around the unit for adequate ventilation to prevent overheating.
Describes the High EQ, Mid-Morph EQ, and Low EQ controls for adjusting tone and frequency response.
Explains controls for Monitor Send, EFX Send, Level, Clip indication, and Signal (SIG) presence.
Details the MIC/LINE INPUT and MIC/HI Z INPUT jacks, including their connectivity and impedance.
Covers XLR BALANCED INPUT, MIC OR MEDIA SELECT BUTTON, and MEDIA INPUT jacks for various audio sources.
Explains the FLS Feedback Locating System and the 9-band Graphic EQ for mix adjustments.
Details amplifier level indicators, input selection for power amps, monitor volume, master volume, and EQ assignment.
Describes master mute functions, Kosmos-C enhancement, and the table for available effect types.
Explains the EFX LED, parameter control encoder, EFX Mute, Clip LED, and effect selection process.
Details Phantom Power supply, Record Level knob, and RCA Record Out jacks for audio recording.
Describes the Footswitch jack, Monitor Out, and Main Out jacks for connecting external amplifiers.
Covers SD card and USB drive slots, and the MODE button for selecting audio sources.
Explains the PLAY/PAUSE, STOP, REPEAT, and TRACK SKIP controls for managing MP3 playback.
Instructions for pairing and connecting Bluetooth devices, and operating music playback.
Details the main power switch, fuse, AC power inlet, and voltage selector switch.
Information on connecting speakers to the Main and Monitor outputs, including impedance ratings.
Lists and describes parameters for Plate, Hall, and Room reverb effects.
Lists and describes parameters for Delay, Enhance, and Chorus effects.
Details input sensitivity, meter array, amplifier limiter, output power, and power requirements.
Provides dimensions, weight, and specifications for the MP3 player and Bluetooth functionality.
Details warranty coverage, exclusions, limitations on implied warranties, and damage exclusions.
Explains how to obtain warranty service, who is protected, and the procedure for making claims.
Lists operating temperature, humidity, input voltage, and notes on environmentally friendly disposal.
Details compliance with FCC and Industry Canada regulations, including conditions for operation.
To Next Page
