Need help?Do you have a question about the Peavey PV14 and is the answer not in the manual?
General| Channels | 14 |
|---|---|
| Phantom Power | Yes |
| EQ Bands | 3-band |
| Effects | Yes |
| USB Interface | Yes |
| Aux Sends | 2 |
| Type | Analog Mixer |
| Inputs - Other | 2 x RCA |
| Outputs - Main | 2 x XLR, 2 x 1/4" |
| Outputs - Other | 2 x RCA |
| EQ Bands Detail | 3-band |
| Aux Sends Detail | 2 (Pre/Post) |
| Effects Detail | Digital Effects Processor |
General safety warnings regarding product usage and user safety.
Warnings and precautions related to electrical shock and fire hazards.
Safety instructions provided in multiple languages for user understanding.
Numbered safety precautions for operating electrical products.
Information on noise exposure limits and the importance of hearing protection.
Congratulatory message and overview of the PV series compact mixers.
Bulleted list of technical features and capabilities of the mixers.
Mandatory clearances from combustible surfaces for safe installation.
Controls for input gain, 80 Hz low cut filter, and three-band equalization.
Controls for monitor/effects sends and stereo field panning.
Mute function to silence channel signal; LED indicates mute or clipping status.
Channel output level control and signal presence indicator.
Jacks for connecting external audio sources like tape decks or computers.
Rotary switch to select one of sixteen built-in digital effects.
Controls for effect time, mixing effects back, and master send levels.
Control for headphone output volume and LED meters for main outputs.
LED indicators for power status and phantom power engagement.
Phantom power switch and functions for tape/USB input routing and monitoring.
Enhances EQ and controls main stereo output levels.
Input and insert points for microphones, line-level sources, and external processors.
Stereo line inputs and A/B switch for selecting audio sources.
Outputs for sending signal to monitor or effects units.
Outputs for main audio mix, control room monitoring, and headphones.
Main power switch and removable IEC power cord connector.
USB connection for computer audio and control for recording level.
Details impedance, gain, input levels, and connectors for various inputs.
Details load impedance, output levels, and connectors for various outputs.
Specifies gain ranges for different input types.
Covers frequency response, distortion, noise, crosstalk, and meters.
Physical attributes and power requirements for each model.
Required clearances from combustible surfaces for safe operation.
Details what the warranty covers and common exclusions.
Outlines warranty periods and procedures for obtaining service.
Addresses implied warranties and liability limitations.
To Next Page
