Need help?Do you have a question about the Peavey Unity 1000 SM and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 12 |
| Inputs - Mic Preamps | 6 x XLR |
| EQ Bands | 3-band |
| EQ | Yes |
| Aux Sends | 1 |
| Phantom Power | Yes |
| USB Connectivity | No |
| Inputs - Other | 1 x Stereo RCA |
| Outputs - Other | 1 x 1/4" Headphone |
| Power Supply | External AC Adapter |
Alerts for dangerous voltage, servicing, electrical shock, rain, and moisture hazards.
Labeled jacks for microphones, line inputs, effects send/return, monitor, and headphones.
Knobs, faders, LEDs for channel gain, EQ, level, pan, mute, and sub mix levels.
Explains GAIN, HIGH, MID, LOW, PAN, LIMIT LED, and LEVEL FADER for main channels.
Describes EFX MASTER, EFX TO MONITOR, EFX RETURN, EFX PAN, MONITOR FADER, TAPE OUT/IN.
Details Sub Mix LEVEL, PAN, MUTE, SUB MIX LEFT/MONITOR/RIGHT, and master outputs.
Summarizes functions of Sub Mix Matrix, Main Channels, and Master Section.
Lists frequency response, noise, distortion, equalization, gain, and power requirements.
Precautions for noise exposure, signal clipping, tape usage, and general product safety.
Illustrates patching for microphones, instruments, EQs, amplifiers, and processors.
Shows how to connect an external stereo effects unit to the mixer's effects loop.
Block diagrams illustrating signal routing through channels, summing amps, and buses.
Outlines the one-year limited warranty, exclusions, and limitations for the product.
Instructions for warranty registration, obtaining service, and contacting customer support.
To Next Page
