Need help?Do you have a question about the Peavey PV 6 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 6 |
| Microphone Inputs | 2 |
| Microphone Preamps | 2 |
| Line Inputs | 4 |
| Phantom Power | Yes |
| EQ Bands | 3 |
| Aux Sends | 1 |
| Aux Sends Type | Pre/Post |
| USB Interface | No |
| Outputs - Main | 2 |
| Outputs - Other | 1 |
| Headphone Output | 1 |
| Power Supply | External |
| Inputs - Other | 2 (stereo) |
| EQ Bands per Channel | 3 (high, mid, low) |
Active tone control for the high frequency range.
Active tone control for the mid frequency range.
Active tone control for the low frequency range.
Controls the stereo placement of the signal in the sound field.
Indicates when the channel signal level is nearing the overload point.
Channel output level control, optimum at unity gain.
Sets headphone and control room output level.
Controls the level sent to the main Left/Right outputs.
Controls level from return inputs to the Left/Right main bus.
Balanced inputs optimized for microphones or low impedance sources.
Sends signal to an external effects processor.
Main audio outputs of the mixer.
Details input impedance, gain, levels, and connector types.
Details output impedance, level, and connector types.
Specifies input gain adjustment ranges for various inputs.
To Next Page
