Need help?Do you have a question about the Peavey TNT 160 and is the answer not in the manual?
General| Type | Bass Amplifier |
|---|---|
| Power Output | 160 Watts |
| Speaker Size | 15 inches |
| Preamp | Solid State |
| Speaker Configuration | 1 x 15" |
| Channels | 1 |
| Inputs | 1 x 1/4" |
| EQ | 3-band EQ (Bass, Mid, Treble) |
Used for most electric basses, it is 6 dB louder than the Low Gain Input.
For instruments with extremely high outputs; can result in overdrive.
Controls the input volume level of the channel.
Controls the overall volume level of the amplifier.
Active tone control for low frequencies; caution on excessive boost.
Provides +/- 15 dB equalization at each center frequency.
Active tone control for high frequencies.
Compression circuit to prevent clipping and protect speakers.
Turns the unit on/off; pilot light indicates power status.
To Next Page